::: Product Preview :::

::: Oil Heaters Filters :::

 

These are used to preheat the fuel oil to the required firing temperature about 100 degree C for furnace oil having Redwood viscosity 1500 scs at 100 degree F. In some cases they are used as "booster heater" to bring the temperature of oil to firing level which was earlier cooled down due to pipeline losses. The heater may consist of one or more tubular type immersion heating elements or renewable cartridge type heating elements. The former is suitable for either horizontal or vertical mounting , but the latter is meant for horizontal mounting only. Inlet to the heater may be from bottom , side or top but however outlet connection to the heater should be from top only.
This is a basket type filter with various mesh sizes suiting various operations. It provides fine filtering to the furnace oil thereby avoid choking of oil nozzles reducing the firing rate and thus a dirtfree oil is supplied to the burner for better atomization and combustion.Two basket filter is combined to give duty cum stand by operation. A Changeover valve is provided on the filter to select the basket to filter the oil.
 

 

Burner
Oil Burner
  Pressure Jet Low Air Pressure
Gas Burner
  Monoblock Fully automatic Gas Burner
  Natural Draft Burner
  Furnace Firegas Burner
Dual Fuel
Centrifugal Blowers
  Forced Draught Blowers
 Induced Draught Blowers
Fuel Oil Heating Pumping Filtering Unit

 Oil Heaters - Filters
Burner Control Systems
Sequence Controller &
    Flame Sensors
Oil Burner [Flame Eye]
Gas Burner [Fire Eye]
U V Controller
 Control Panels
 High / Low Flame Controller
Heating & Drying System
 Boilers
Coil Type Boiler Mini Gas Steam Boiler
Electric Steam Boiler
 Hot Air Generators
 Ovens
 Furnaces
Multi Gas Cylinder Installation
Designed & Hosted by : MID    Promoted by : GID